Hjælp til Phonak ComPilot II

To begin pairing, remove the ComPilot II from the patient’s neck and switch ComPilot II on.

Place the ComPilot II and cell phone next to each other.

Find the connectivity settings of the phone menu program and switch on the Bluetooth settings.

Press and hold the connect and volume up buttons simultaneously (2 sec) until the audio indicator starts to rapidly blink blue.

Select “Phonak ComPilot II” from the list of found Bluetooth devices.

If asked, enter 0000 and accept the request to access the phone book.

Pairing is successful when the audio indicator light stops blinking blue and the phone shows the ComPilot II is connected.

A quick pairing instruction is also shown on the back of ComPilot II.

Switch ComPilot II On.

Press and hold the connect and volume up buttons simultaneously (2 sec) until the audio indicator starts to rapidly blink blue.

Find the connectivity settings of the tablet or iPad menu program and switch on the Bluetooth settings.

Select “Phonak ComPilot II” from the list of found Bluetooth devices.

Pairing is successful when the audio indicator light stops blinking blue and the tablet or iPad shows that ComPilot II is connected.

A quick pairing instruction is also shown on the back of ComPilot II.

Switch ComPilot II On.

Press and hold the connect and volume up buttons simultaneously (2 sec) until the audio indicator starts to rapidly blink blue.

Then insert the Sennheiser BTD USB Adapater into a free USB port on your running computer.

The pairing occurs automatically.

Pairing is successful when the audio indicator light stops blinking blue and the USB adapter shows a constant blue light.

A quick pairing instruction is also shown on the back of ComPilot II.