Skip to main content
選擇其他國家或地區，以查看您所在地區的特定內容。
Phonak logo
線上聽力測試

Why won't my rechargeable Phonak hearing aids turn on?

Phonak hearing aid will not turn on after being removed from the charger. There is no startup green light blinking, indicator LED light is off, and there is no sound from the hearing aid.
Possible causes and troubleshooting:
  • Auto-on feature settings. If Auto-on feature is disabled, your hearing aids won't switch on automatically once removed from the charger. To turn the hearing aids on manually, press and hold the lower part of the hearing aid button for 3 seconds until the indicator light blinks green.
 
  • Hearing aid is completely discharged. Hearing aids were not charging because charger was not correctly connected to power supply or hearing aids were not inserted properly into the charger. Place the rechargeable hearing aid in the power-connected charger and wait three hours regardless of LED behavior. 
​​​​​​​​​​​​​​
  • Hearing aid is in error state: Reboot the hearing aid:
    • Instruction for Phonak Infinio hearing aids: Press the push button for at least 15 seconds. It does not matter if the hearing aid is switched on or off before you start pressing the button. After 15 seconds the indicator light on the hearing aid blinks green and then turns solid green. The hearing aid is ready to use. 
    • Instruction for other Phonak rechargeable hearing aids: 
      1. Press the lower part of the button for at least 15 seconds. It does not matter if the hearing aid is switched on or off before you start pressing the button. There is no light or acoustic notification at the end of the 15 seconds.
      2. Place the hearing aid in the power-connected charger and wait until the indicator light blinks green. This can take up to 30 seconds. The hearing aid is now ready to use.
If the problem persists, contact your hearing care professional for assistance.